I’ve worked on dozens of NewAir AI-215SS units over the years, and fan motor noise is hands-down the most frequent complaint I hear from owners of this model. In most cases, the culprit is either a worn fan blade rubbing against the housing or a failing evaporator fan motor bearing. Nine times out of ten, … Read more
I’ve worked on quite a few KitchenAid KDTE334GPS units over the years, and a loud grinding noise is one of the most common calls I get on this model. In most cases, the culprit is either debris caught in the circulation pump or a worn wash impeller — both very fixable problems that don’t require … Read more
I’ve worked on quite a few Miele G7106SCU units over the years, and bearing noise from the circulation pump is one of the more common complaints I see on this model — usually showing up after 4-6 years of use. The grinding or humming sound almost always means the pump bearings are worn past saving, … Read more
I’ve worked on the LG LFXS26973S more times than I can count, and evaporator fan motor noise is hands-down one of the most frequent complaints I see with this French-door model. That grinding or squealing sound usually means the fan motor bearings are failing or ice has built up around the blades. Nine times out … Read more
I’ve worked on dozens of Maytag MHW5630HW front-loaders with this exact bearing noise complaint, and it’s one of the more frequent calls I get on this model. That grinding or rumbling sound during the spin cycle almost always points to failed rear drum bearings and a worn tub seal. The good news is it’s very … Read more
