I’ve worked on quite a few Miele G7106SCU AutoDos units over the years, and water inlet valve failure is one of the more common calls I get on this model. Usually the fix comes down to a faulty solenoid coil or sediment buildup blocking the valve seat — and in most cases, a full valve … Read more
I’ve worked on quite a few Miele G7106SCU units over the years, and bearing noise from the circulation pump is one of the more common complaints I see on this model — usually showing up after 4-6 years of use. The grinding or humming sound almost always means the pump bearings are worn past saving, … Read more
I’ve worked on quite a few Miele AutoDos units over the years, and the G7106SCU is one I see regularly with dispenser calibration and clogging issues. This is actually one of the more common service calls for this model — the AutoDos system is sensitive to detergent buildup and air pockets in the dosing line. … Read more
