Refrigerator

In my years of working in appliance repair, I’ve traveled over 80,000 miles across North America in three different rigs, fixing everything from washers to ice makers in every kind of climate imaginable. The Maytag MFI2570FEZ French door refrigerator has been a frequent visitor at my workshop, and one of the biggest complaints I encounter … Read more

Hi, I’m Drew Callahan. After clocking over 80,000 miles across North America in three different rigs, I’ve had my fair share of encounters with appliance repairs. From fixing appliances in the varied climates of campgrounds, garages, and RVs, I’ve seen everything, and the Whirlpool WRF535SWHZ is a model I know well. A non-functional water dispenser … Read more

Hi, I’m Drew Callahan. Over the years, I’ve logged more than 80,000 miles across North America in three different rigs, tackling appliance repairs in every climate imaginable. The LG LRMVS3006S is a model that often finds its way to my workbench. Homeowners frequently think all they need to do is reset their fridge, but in … Read more

I’m Drew Callahan, and with over 80,000 miles traversed across North America in three different rigs, I’ve had my hands on countless Samsung French Door refrigerators, including the RF28R7351SR. This model frequently comes across my bench with a not-cooling complaint. Based on my extensive experience, about 80% of these issues can be traced back to … Read more

I’ve worked on the Sub-Zero BI-36UFD more times than I can count, and alarm codes are easily the most common service call I get for this model. In most cases, the culprit is either a faulty door gasket causing temperature drift or a failing thermistor sending bad readings to the control board. Once you identify … Read more

I’ve worked on dozens of Sub-Zero BI-36UFD units over the years, and vacuum seal door failure is honestly one of the most common calls I get on this model. The culprit is almost always a worn or cracked door gasket that’s lost its magnetic grip, and in most cases swapping it out completely solves the … Read more

I’ve worked on dozens of GE Profile French Door refrigerators, and the PYE22KYNFS is one of the models I see most often for this exact dripping dispenser issue. In my experience, about 80% of the time it comes down to a worn or cracked dispenser water inlet valve or a faulty dispenser actuator pad that’s … Read more

In my 15+ years of service calls, dirty condenser issues on the Sub-Zero BI-36UFD are probably the most common complaint I see — and thankfully, one of the easiest to resolve. This built-in model’s condenser is notorious for trapping pet hair and kitchen grease, leading to warm temps and compressor overwork. A thorough cleaning almost … Read more

I’ve worked on quite a few GE Profile French Door refrigerators, and the PYE22KYNFS door-in-door hinge issue is one of the more common calls I get. The inner panel door stops aligning properly over time, usually due to a worn or cracked hinge pin assembly. In most cases, replacing the hinge components and realigning the … Read more

I’ve worked on dozens of Whirlpool WRX735SDHZ units over the years, and ice dispenser motor failure is one of the most frequent service calls I get for this model. Nine times out of ten, the auger motor itself is the culprit, and swapping it out is a very manageable DIY repair that gets your ice … Read more