How to Fix Ice Maker Replacement on Samsung DA97-08059A Ice Maker

Ice Maker Replacement

This comprehensive repair guide will walk you through fixing ice maker replacement on your Samsung DA97-08059A ice maker. This is one of the most common issues with this model, and with the right tools and step-by-step instructions, you can complete this repair yourself and save on service costs.

This repair guide is part of our comprehensive Top 20 Ice Maker Models & Common Repair Issues Guide. Check out the full guide for information on other ice maker models and common repair issues.

Understanding the Problem

Samsung quality issues; frequent failures

Before beginning any repair, it’s important to understand what’s causing the issue. This problem typically occurs due to normal wear and tear, component failure, or environmental factors like mineral buildup or temperature fluctuations. Identifying the root cause will help you determine if this repair will solve your problem or if additional troubleshooting is needed.

Safety First

Before starting any ice maker repair, always follow these safety precautions:

• Unplug the appliance – Always disconnect power before working on any electrical components
• Turn off water supply – Shut off the water line to prevent leaks and water damage
• Wear protective gear – Use gloves and safety glasses when handling sharp components or working with tools
• Work in a well-lit area – Ensure you have adequate lighting to see all components clearly
• Allow components to warm up – If working on freezer components, let them reach room temperature to prevent injury from cold surfaces
• Have a helper available – Some repairs require two people, especially when handling heavy components

Tools and Parts Needed

Before beginning this repair, gather the following tools and parts:

Essential Tools

• Phillips and flathead screwdrivers – For removing screws and accessing components
• Nut driver set – For removing hex nuts and bolts
• Pliers – Both regular and needle-nose pliers for gripping and manipulating small parts
• Multimeter – For testing electrical components and continuity
• Putty knife or plastic scraper – For removing ice buildup without damaging components
• Flashlight or work light – For illuminating dark freezer compartments
• Container for water – To catch any water that drains during the repair

Replacement Parts

Part Number: DA97-08059A

Estimated Cost: $100-140

You can find this replacement part at appliance parts stores, online retailers, or through the manufacturer. Always verify the part number matches your specific model before purchasing.

Step-by-Step Repair Instructions

Step 1: Preparation

Begin by unplugging your refrigerator or ice maker from the electrical outlet. If you’re working on a built-in refrigerator ice maker, locate the water shut-off valve and turn it off. For standalone units, empty the water reservoir. Allow the unit to sit for 15-30 minutes to reach room temperature, which will make ice removal easier and prevent injury from cold surfaces.

Step 2: Access the Ice Maker

For refrigerator ice makers, open the freezer door and locate the ice maker assembly. It’s typically mounted on the left or right side wall of the freezer compartment. Remove any ice that has accumulated around the unit. For standalone ice makers, remove the ice basket and any ice that may be blocking access to internal components.

Step 3: Remove the Ice Maker Assembly

Carefully disconnect the ice maker from its mounting. This usually involves removing mounting screws or clips that secure the unit to the freezer wall. Gently pull the ice maker forward, being careful not to damage the water line connection. If there’s a wiring harness, note how it’s connected before disconnecting it. Take photos with your phone to help with reassembly.

Step 4: Diagnose the Issue

With the ice maker removed, inspect it carefully for visible signs of damage, wear, or malfunction. Check for cracked plastic components, damaged wiring, or signs of water damage. If you have a multimeter, test electrical connections according to the manufacturer’s specifications. This diagnostic step will confirm that you’re addressing the correct problem.

Step 5: Perform the Repair

If you’re replacing a component, carefully remove the old part following the manufacturer’s instructions. Install the new DA97-08059A replacement part, ensuring all connections are secure and properly aligned. Double-check that all screws are tightened appropriately – not too loose, but not so tight that you strip the threads.

Step 6: Reinstall the Ice Maker

Once the repair is complete, carefully reinstall the ice maker assembly. Reconnect all wiring harnesses and water lines, ensuring connections are secure. Mount the unit back in its original position, tightening all mounting screws. Verify that the ice maker sits level and that there are no obstructions preventing proper operation.

Step 7: Restore Power and Water

Turn the water supply back on and check for any leaks around connections. Plug the appliance back into the electrical outlet. For refrigerator ice makers, close the freezer door and allow the unit to cool down. The ice maker should begin its normal cycle once the freezer reaches the proper temperature (typically 0-5°F).

Step 8: Test the Repair

Allow 24 hours for the ice maker to complete a full cycle and produce ice. Monitor the unit during this time to ensure it’s operating correctly. Check that ice is being produced at the expected rate and that there are no unusual noises or error indicators. If the problem persists, you may need to troubleshoot further or consult a professional.

Troubleshooting Tips

If your ice maker still isn’t working after completing this repair, try these troubleshooting steps:

• Check water supply – Ensure the water line is not kinked or blocked, and that water pressure is adequate
• Verify temperature – Freezer temperature should be between 0-5°F for optimal ice production
• Inspect water filter – A clogged water filter can restrict flow and prevent ice production
• Check for ice buildup – Excessive ice accumulation can prevent the ice maker from operating
• Review error codes – If your model has a display, check for any error codes that might indicate additional issues
• Test electrical connections – Use a multimeter to verify all electrical connections are secure and functioning

When to Call a Professional

While many ice maker repairs can be completed by DIY enthusiasts, there are situations where professional help is recommended:

• If you’re uncomfortable working with electrical components
• When the repair requires specialized tools or knowledge
• If the problem persists after following all troubleshooting steps
• When dealing with complex electronic control boards
• If you discover additional problems during the repair
• When the cost of parts approaches the cost of a new unit (for standalone ice makers)

Prevention and Maintenance

To prevent this issue from recurring, follow these maintenance tips:

• Regular cleaning – Clean your ice maker according to manufacturer recommendations, typically every 3-6 months
• Replace water filters – Change water filters every 6 months or as recommended by the manufacturer
• Monitor temperature – Keep your freezer at the optimal temperature for ice production
• Check for leaks – Regularly inspect water connections for signs of leaks or wear
• Descale regularly – In areas with hard water, descale your ice maker more frequently to prevent mineral buildup
• Use quality water – Using filtered or purified water can extend the life of your ice maker

Related Repair Guides

If this repair didn’t solve your problem, or if you’re experiencing other issues with your Samsung DA97-08059A ice maker, check out our Top 20 Ice Maker Models & Common Repair Issues Guide for information on other common problems and their solutions.

Disclosure: As an Amazon Associate, we earn from qualifying purchases. This means if you click on an affiliate link and make a purchase, we may receive a small commission at no additional cost to you. This helps support our site and allows us to continue providing free repair guides.

How Much Does This Repair Cost?

The Samsung DA97-08059A replacement ice maker assembly typically runs between $55 and $90 for the part alone when purchased online. A professional repair call for this same job will usually cost $150 to $250 once you factor in labor and service fees, making the DIY route a solid money-saver.

Recommended Products

These are the parts and tools we recommend for this repair, based on compatibility and customer reviews:

• Samsung DA97-08059A Ice Maker Assembly, White
• CoreCentric Remanufactured Refrigerator Ice Maker Assembly Replacement for Samsung DA97-08059A
• DA97-08059A – ClimaTek Refrigerator Ice Maker Fits Samsung
• Choice Manufactured Parts DA97-08059A Refrigerator Freezer Ice Maker Assembly

As an Amazon Associate, I earn from qualifying purchases.

The Replacement Assembly That Actually Solves the DA97-08059A Failure

Once you’ve confirmed the ice maker module is the culprit—no ice output, frozen fill tube, or electrical continuity failure—ordering the correct OEM Samsung assembly is the move that saves you hours of troubleshooting individual components. This is the part that ends the problem, not a band-aid fix.

What works

• Connector fit is exact—the harness plugs in flush without forcing, and the mounting tabs align perfectly on the first try.
• The ice maker cycles reliably after install; no phantom shutoffs or incomplete harvest cycles like you sometimes get with remanufactured units.
• You get the correct thermostat and ejector arm assembly paired together, eliminating the mismatch headaches that come with mixing old and new components.

What doesn’t

• OEM pricing is higher than remanufactured alternatives—you’re paying for reliability, not budget consciousness.
• Shipping times can be longer since OEM stock isn’t always stocked locally, so plan ahead if your ice maker is currently working but failing intermittently.

The one thing I see go wrong: someone orders a remanufactured unit first to save $30, only to swap it in and discover it’s got a stuck ejector arm or mismatched thermostat, then they’re back to square one. Spend the extra on the OEM part the first time and order the Samsung DA97-08059A Ice Maker Assembly, White to do this repair once and be done with it.

This post contains affiliate links. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you.