How to Fix Ice Maker Assembly Replacement on Frigidaire 5303918344 Ice Maker

Ice Maker Assembly Replacement

In this guide, I’ll walk you through the process of fixing the ice maker assembly replacement on your Frigidaire 5303918344 ice maker. This is a common problem with this model, and with the right tools and these step-by-step instructions, you can handle this repair yourself and save on service fees.

This repair guide is part of our comprehensive Top 20 Ice Maker Models & Common Repair Issues Guide. For more information on other ice maker models and their common issues, check out the full guide.

Understanding the Problem

Stops making ice; control module or motor failure

Before starting any repair, it’s crucial to understand the cause of the issue. Typically, this problem arises from normal wear and tear, component failure, or environmental factors like mineral buildup or temperature fluctuations. Identifying the root cause will guide you in determining if this repair will solve your issue or if further troubleshooting is necessary.

Safety First

Before you dive into any ice maker repair, keep these safety precautions in mind:

• Unplug the appliance – Always disconnect power before working on any electrical components.
• Turn off water supply – Shut off the water line to avoid leaks and water damage.
• Wear protective gear – Use gloves and safety glasses when handling sharp components or working with tools.
• Work in a well-lit area – Ensure adequate lighting to see all components clearly.
• Allow components to warm up – If working on freezer components, let them reach room temperature to avoid injury from cold surfaces.
• Have a helper available – Some repairs require two people, particularly when handling heavy components.

Tools and Parts Needed

Before starting this repair, gather the following tools and parts:

Essential Tools

• Phillips and flathead screwdrivers – For removing screws and accessing components.
• Nut driver set – For removing hex nuts and bolts.
• Pliers – Both regular and needle-nose pliers for gripping and manipulating small parts.
• Multimeter – For testing electrical components and checking continuity.
• Putty knife or plastic scraper – For removing ice buildup without damaging components.
• Flashlight or work light – For illuminating dark freezer compartments.
• Container for water – To catch any water that drains during the repair.

Replacement Parts

Part Number: 5303918344

Estimated Cost: $75-110

You can find this replacement part at appliance parts stores, online retailers, or through the manufacturer. Always verify that the part number matches your specific model before purchasing.

Step-by-Step Repair Instructions

Step 1: Preparation

Start by unplugging your refrigerator or ice maker from the electrical outlet. If you’re working on a built-in refrigerator ice maker, locate the water shut-off valve and turn it off. For standalone units, empty the water reservoir. Allow the unit to sit for about 15-30 minutes to reach room temperature, making ice removal easier and preventing injury from cold surfaces.

Step 2: Access the Ice Maker

For refrigerator ice makers, open the freezer door and locate the ice maker assembly, usually mounted on the left or right side wall of the freezer compartment. Remove any ice that has built up around the unit. For standalone ice makers, take out the ice basket and any ice blocking access to the internal components.

Step 3: Remove the Ice Maker Assembly

Carefully disconnect the ice maker from its mounting. This often involves removing screws or clips that secure it to the freezer wall. Gently pull the ice maker forward, being careful not to damage the water line connection. If there’s a wiring harness, note how it’s connected before disconnecting it. A few photos on your phone can really help with reassembly.

Step 4: Diagnose the Issue

With the ice maker removed, take a good look at it for any visible signs of damage, wear, or malfunction. Look for cracked plastic components, damaged wiring, or signs of water damage. If you have a multimeter, test electrical connections according to the manufacturer’s specifications. This diagnostic step will ensure you’re addressing the right problem.

Step 5: Perform the Repair

If you’re replacing a component, carefully remove the old part per the manufacturer’s instructions. Install the new 5303918344 replacement part, ensuring all connections are secure and properly aligned. Double-check that all screws are tightened appropriately—not too loose, but not so tight that you strip the threads.

Step 6: Reinstall the Ice Maker

Once the repair is complete, carefully reinstall the ice maker assembly. Reconnect all wiring harnesses and water lines, ensuring that all connections are secure. Mount the unit back in its original position and tighten all mounting screws. Make sure the ice maker sits level and that there are no obstructions preventing proper operation.

Step 7: Restore Power and Water

Turn the water supply back on and check for any leaks around the connections. Plug the appliance back into the electrical outlet. For refrigerator ice makers, close the freezer door and allow the unit to cool down. The ice maker should start its normal cycle once the freezer reaches the proper temperature, typically between 0-5°F.

Step 8: Test the Repair

Allow 24 hours for the ice maker to complete a full cycle and produce ice. Keep an eye on the unit during this time to ensure it’s working correctly. Check that ice is produced at the expected rate and that there are no unusual noises or error indicators. If the problem persists, you may need to troubleshoot further or consult a professional.

Troubleshooting Tips

If your ice maker still isn’t working after completing this repair, consider these troubleshooting steps:

• Check water supply – Ensure the water line isn’t kinked or blocked, and that the water pressure is adequate.
• Verify temperature – The freezer temperature should be between 0-5°F for optimal ice production.
• Inspect water filter – A clogged water filter can restrict flow and prevent ice production.
• Check for ice buildup – Excessive ice accumulation can prevent the ice maker from operating.
• Review error codes – If your model has a display, check for any error codes indicating additional issues.
• Test electrical connections – Use a multimeter to verify all electrical connections are secure and functioning.

When to Call a Professional

While many ice maker repairs can be done by DIY enthusiasts, there are times when professional help is the way to go:

• If you’re uncomfortable working with electrical components.
• When the repair requires specialized tools or knowledge.
• If the problem continues after trying all troubleshooting steps.
• When dealing with complex electronic control boards.
• If additional problems are discovered during the repair.
• When the cost of parts approaches the cost of a new unit (for standalone ice makers).

Prevention and Maintenance

To avoid this issue in the future, follow these maintenance tips:

• Regular cleaning – Clean your ice maker based on manufacturer recommendations, usually every 3-6 months.
• Replace water filters – Change water filters every 6 months or as advised by the manufacturer.
• Monitor temperature – Keep your freezer at the right temperature for ice production.
• Check for leaks – Regularly inspect water connections for signs of leaks or wear.
• Descale regularly – In areas with hard water, descale your ice maker more frequently to prevent mineral buildup.
• Use quality water – Using filtered or purified water can extend the life of your ice maker.

Related Repair Guides

If this repair didn’t resolve your issue, or if you’re facing other problems with your Frigidaire 5303918344 ice maker, check out our Top 20 Ice Maker Models & Common Repair Issues Guide for more information on common problems and solutions.

How Much Does This Repair Cost?

Repair route	Typical cost
Do it yourself	$45–$90 (parts)
Professional repair	$150–$280 (parts and labor)

For a DIY repair on the Frigidaire 5303918344, expect to pay between $45 and $90 for a replacement ice maker assembly, depending on the supplier. A professional repair for the same job typically runs $150 to $280 once you factor in labor and service fees, making this a repair well worth tackling yourself.

Recommended Products

These are the parts and tools I recommend for this repair, based on compatibility and customer reviews:

• 5303918344 Ice Maker Assembly Compatible With Frigidaire Refrigerators
• 5303918344 Ice Maker Assembly Replacement for Frigidaire Electrolux Kenmore Refrigerator, Replace 7241709801 240599901 PS1992700 etc.
• 5303918344 Ice Maker Assembly Replacement for Frigidaire Electrolux Refrigerator, 8 Cube Rear Mount Ice Maker, Replaces 5303918344 241627701 PS1992700
• 5303918344 Ice Maker Fits for Electrolux Kenmore Frigidaire

The Replacement Assembly That Actually Stops the Frigidaire 5303918344 from Freezing Up

When the ice maker assembly fails on this Frigidaire model, you’re not diagnosing a sensor or testing a solenoid—you’re ordering the complete assembly and swapping it out. This is the direct OEM-compatible part that gets the machine back to making ice without the guesswork of chasing individual components.

What works

• Drop-in fit with no modification—the mounting points line up exactly, and you’re not forcing anything into place or hunting for missing brackets.
• Water inlet connection and electrical harness plug directly into the existing lines, so you skip the frustration of adapter hunting and incompatible fittings.
• Ice production resumes within minutes of installation in most cases—I’ve seen units making a full tray within 30 minutes of a fresh assembly going in.

What doesn’t

• There’s no way to salvage the old assembly for parts—you’re committing to a full replacement, which is actually fine because the individual components rarely fail in isolation on this model.
• Some listings claim compatibility with multiple model numbers, but verify against your specific Frigidaire model before ordering to avoid a return trip.

I’ve seen people order every sensor and valve separately before realizing the assembly itself was the culprit—it wastes time and money when the assembly replacement solves it in one shot. Grab the 5303918344 Ice Maker Assembly Compatible With Frigidaire Refrigerators and you’ll be done before lunch.