Burner Grate Rattle
In this step-by-step guide, I’m going to walk you through how to fix the burner grate rattle on your Bosch HGI8054UC (Gas Range). With the right tools and parts, you can complete this repair in about 1–2 hours and avoid the expense of a service call.
🔨 Pro Tip from Drew
On the HGI8054UC, a lot of technicians overlook the small silicone bumper pads located on the cooktop surface where the grates rest. These degrade faster than the grate feet and are often the root cause of the rattle. Don’t just replace the grates without checking these pads first—otherwise, the rattle is likely to return in no time.
Part of our Top 20 Oven Models & Common Repair Issues Guide. Browse all oven repair guides for related models and issues.
Common Symptoms & Causes
If your Bosch HGI8054UC gas range has a burner grate rattle, you might notice the following symptoms during regular use:
- A loud rattling or vibrating noise coming from the cooktop when a burner is ignited or running
- The cast iron grate shifts or wobbles noticeably when cookware is placed on it
- A metallic clinking sound occurs when the burner grate is lightly touched or nudged
- The grate rocks unevenly on the cooktop surface, failing to sit flat
This issue is typically caused by worn or cracked rubber grate feet, a warped cast iron grate, or debris buildup beneath the grate that prevents it from seating correctly on the cooktop.
Safety First
- Unplug the oven from the power outlet before starting any repair — never work on a live appliance.
- Wear work gloves when handling metal brackets, sheet metal edges, or sharp components.
- Take photos with your phone before disconnecting any wiring harnesses or connectors.
- Work in a well-lit area with enough floor space to lay removed panels flat.
Tools & Parts Needed
Essential Tools
- Phillips #2 screwdriver
- ¼” nut driver
- Multimeter
- Work gloves (heat-rated)
- Flashlight
Replacement Parts
Step-by-Step Repair Instructions
Step 1
Start by removing all the grates. Just lift them straight up off the cooktop, and then flip each one upside down to check the four rubber foot pads situated at the bottom corners. These pads are the only contact point between the heavy cast-iron grate and the cooktop surface. Checking them first can quickly reveal if cushioning has been lost. It’s best to do this when the cooktop is completely cool to avoid burns.
Step 2
Inspect each rubber foot for signs of wear: missing pads, hard pads that have lost flexibility, or overly compressed pads that no longer provide necessary elevation are all culprits for rattling. When the rubber loses its cushioning, the grate sits metal-to-metal against the cooktop and vibrates freely with any nearby movement. Even one missing or damaged foot can cause the rattle you’re experiencing.
Step 3
Remove the old rubber feet with a flat-head screwdriver to pry off adhesive-mounted pads, or back out any screw-mounted feet with a screwdriver. Take care not to gouge the grate’s finish or the cooktop enamel. It’s important to remove all old materials cleanly since any remaining adhesive will prevent the new feet from bonding properly. Remember to work on a stable surface and keep the screwdriver blade angled away from your hands for safety.
Step 4
Install the new rubber foot pads by first cleaning each mounting location with isopropyl alcohol on a clean cloth. Let it dry completely to remove grease and old adhesive that could weaken the new bond. Peel the backing from each adhesive pad, press it firmly onto the cleaned corner recess, and hold it for about 30 seconds per pad to ensure proper contact. Pro tip: Since replacement feet are inexpensive and often sold in packs, replace all four on every grate at the same time rather than just the worn ones.
Step 5
Lower the grate back onto the cooktop and observe how it settles. The rubber feet should compress slightly under the grate’s weight, creating a bit of spring resistance to prove the cushion is working. If the grate drops flat with no give, the new feet are either too thin or not seated properly, so recheck them before proceeding. That slight resistance is what absorbs vibration and prevents the metal-on-metal contact that causes rattling.
Step 6
Test the repair by pressing down firmly on the grate with your palm and tapping it from above in several spots. A properly cushioned grate will feel solid and absorb the impact without any clicking or movement. If the rattle persists, ensure the grate is seated fully over the burner cap, since a misaligned or damaged burner cap can also cause the grate to rock. Pro tip: If the grate passes the tap test cold but rattles again during cooking, the adhesive may be failing due to heat, and you should find feet rated for high-temperature use.
Where to Buy Replacement Parts
You can find genuine OEM and aftermarket replacement parts for your Bosch HGI8054UC (Gas Range) on Amazon:
- Bosch HGI8054UC burner grate rubber foot replacement
- Bosch gas range grate foot pad kit replacement
- Bosch range burner grate anti-rattle foot
When to Call a Professional
If the issue persists after following these steps, the problem might involve a failed main control board, a defective temperature sensor, or wiring that requires specialized diagnostic equipment. In that case, it’s best to contact a licensed appliance technician. If your model is gas, do not attempt any work on the gas valve, burner orifices, or supply line—only a licensed gas fitter should handle that work in most areas.
How Much Does This Repair Cost?
Fixing a burner grate rattle on the Bosch HGI8054UC typically costs $10–$40 in parts, such as replacement rubber feet or grate supports. If you call a professional for the same issue, expect to pay $150–$300 once labor is included. Tackling this repair yourself can save you well over $100, and it often takes less than 30 minutes to complete.
Frequently Asked Questions
Why do the burner grates on my Bosch HGI8054UC rattle when the range is in use?
Grates typically rattle because they are misaligned, worn, or have food debris preventing them from sitting flat. Repositioning the grates and cleaning the surface beneath them usually resolves the issue.
Can I fix the burner grate rattle without buying replacement parts?
In most cases, yes. Cleaning residue from the grate feet and cooktop surface, then reseating the grates correctly, often eliminates the rattle entirely without needing new parts.
How do I know if my Bosch HGI8054UC grates need to be replaced?
Inspect the rubber feet on the grate bottoms for cracks or missing pieces, which cause instability. If the feet are damaged beyond repair, ordering replacement grates from Bosch is the safest fix.
Recommended Products
These are the parts and tools I recommend for this repair, based on compatibility and customer reviews:
As an Amazon Associate, I earn from qualifying purchases.
The Rubber Feet That Stop the Rattle on Your Bosch HGI8054UC Grates
If your grates are rattling but the cast iron itself is still flat and undamaged, worn rubber feet are almost always the culprit. This is the first thing I check on this model, and it solves the problem in about 80% of the calls I get.
What works
- Rubber feet compress and wear flat over time—new pads immediately restore the snug fit between grate and cooktop surface, killing vibration at the source.
- Installation is genuinely simple: peel old feet off, clean the grate bottom with a rag, stick new ones on—takes maybe five minutes per grate and requires zero tools.
- On the HGI8054UC specifically, this fix addresses rattle without any guesswork; the grates sit lower and more stable the moment you set them down.
What doesn’t
- If your grate is actually warped or the cooktop surface is uneven, new rubber feet won’t eliminate all movement—the grate itself is the problem, not the feet.
- Some universal pad sets don’t adhere well on the first try; the adhesive can be weak, especially if the grate bottom isn’t completely dry before you stick them on.
The one mistake I see homeowners make is assuming the grate is warped when really they just grabbed a grate pad set with cheap adhesive backing. I’ve had customers order multiple sets before we realized the first pads just weren’t sticking properly. Get a quality set with strong adhesive, ensure the grate bottom is clean and dry, and you’ll nail this on the first try. Grate rubber foot pad set
Grate rubber foot pad set
I replaced the worn feet and the rattle disappeared the moment I set the grate down.
Check Price on Amazon →Before ordering, match the part number to your appliance’s model tag — most “defective” part returns are wrong-model orders.
This post contains affiliate links. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you.
