Samsung MS14K6000AS Ceramic Tray Replacement – Step-by-Step Guide

I’ve worked on dozens of Samsung countertop microwaves over the years, and the MS14K6000AS ceramic tray is one of the most frequently replaced parts I see — usually due to accidental drops or thermal cracking from uneven heating. The good news is this is genuinely one of the easiest fixes out there, requiring zero tools and about two minutes of your time.

Dave Holt — Certified Appliance Repair Technician

Experience: 15+ years servicing residential & commercial appliances • Certifications: EPA 608 Certified, NATE-recognized technician • Former lead technician at a multi-state appliance service company • Specialties: Washers, dryers, refrigerators, dishwashers, ovens, microwaves, ice makers

Ceramic Tray Replacement Guide

If your Samsung MS14K6000AS microwave has a cracked, broken, or missing ceramic turntable tray, replacing it is a simple EASY repair that takes just a few minutes. The ceramic tray sits on top of the roller ring and rotates during cooking to ensure even heating. This is not technically a “repair” but a common replacement part.

🔨 Pro Tip from Dave

When sourcing a replacement tray for the MS14K6000AS, look specifically for Samsung part number DE74-20002B, which is the correct 13.6-inch ceramic turntable plate for this model. A common mistake I see is buyers grabbing a generic glass tray instead of ceramic — the weight and heat distribution properties differ, and it can affect cooking performance. Also confirm your roller ring guide (part DE97-00593A) isn’t cracked before installing the new tray, since a damaged roller ring causes premature tray breakage.

When to Replace the Ceramic Tray

You should replace the ceramic tray if:

The tray is cracked or broken
The tray is chipped or damaged
The tray is missing
The tray wobbles or doesn’t sit level
The tray is warped or doesn’t rotate smoothly

⚠️ Safety Note

While this is a simple replacement, always unplug the microwave before removing or installing the tray. This prevents accidental operation and ensures safety.

Parts Needed

Check each product page for other buying options. (Part #: DE74-20102D)

Note: Measure your existing tray diameter before ordering. Common sizes are 10″, 12″, or 14″ depending on the microwave model.

Tools Required

None! This is a tool-free replacement
Optional: Measuring tape to verify tray size
Optional: Clean cloth to wipe the roller ring

Step-by-Step Instructions

Step 1: Unplug the Microwave

Unplug the microwave from the wall outlet. This is a safety precaution, even though you’re only working inside the cooking cavity.

Step 2: Remove the Old Tray

Open the microwave door. Lift the old ceramic tray straight up and out of the microwave. The tray sits on top of the roller ring, so it should lift off easily. If the tray is broken, carefully remove all pieces to avoid cutting yourself.

Step 3: Clean the Roller Ring

While the tray is removed, take the opportunity to clean the roller ring and the bottom of the cooking cavity. Wipe away any food debris, grease, or particles that may have accumulated. This helps ensure smooth rotation of the new tray.

Step 4: Inspect the Roller Ring

Check the roller ring (the plastic ring that the tray sits on) for damage:

Ensure the ring is properly seated in its groove
Check for cracks or damage to the ring
Verify the ring rotates freely
If the ring is damaged, it should be replaced as well

Step 5: Install the New Tray

Place the new Samsung DE74-20102D ceramic tray on top of the roller ring. The tray should sit level and centered. The tray has a raised center hub that fits over the center of the roller ring. Ensure the tray sits flat and doesn’t wobble.

Step 6: Verify the Tray Fits Properly

Check that the new tray:

Sits level and doesn’t wobble
Has adequate clearance from the cavity walls (shouldn’t rub)
Centers properly on the roller ring
Rotates freely when you spin it by hand

Step 7: Test the Installation

Plug the microwave back into the wall outlet. Place a cup of water in the center of the new tray. Start a 30-second cooking cycle. Watch to ensure the tray rotates smoothly without wobbling or making unusual noises. The rotation should be steady and the tray should remain level.

Troubleshooting

If the tray doesn’t rotate properly:

Verify the tray is the correct size for your model
Check that the roller ring is properly seated
Ensure the tray is centered on the ring
Inspect the turntable motor (may need replacement)
Check for obstructions preventing rotation

Maintenance Tips

To extend the life of your new ceramic tray:

Handle the tray carefully – ceramic can crack if dropped
Clean the tray regularly with mild soap and water
Don’t place extremely hot items directly on the tray
Avoid using metal utensils that could scratch the surface
Don’t overload the tray with heavy dishes

When to Replace Other Components

If the tray still doesn’t rotate properly after replacement, you may need to replace:

Roller ring – If it’s cracked or damaged
Turntable motor – If the motor has failed
Turntable coupling – If the connection between motor and ring is broken

← Back to Top 20 Microwave Models & Common Repair Issues Guide

How Much Does This Repair Cost?

A genuine Samsung DE74-20002B ceramic replacement tray typically runs $25–$45 on Amazon or through Samsung parts retailers. If you mistakenly called a technician for this swap, you’d likely pay $75–$150 once you factor in a service call fee — making DIY the obvious choice here.

Recommended Products

These are the parts and tools we recommend for this repair, based on compatibility and customer reviews:

As an Amazon Associate, I earn from qualifying purchases.

Post Views: 0