Dave Holt 
I’ve worked on the LG LRG4115ST more times than I can count, and a weak or failed igniter is by far the most common service call I get for this range. In most cases, the fix is straightforward — replace the flat-style igniter (part EBZ37171901) and you’re back in business within an hour. Dave Holt … Read more
I’ve worked on the Bosch HGI8054UC quite a bit over the years, and dirty or damaged burner caps and rings are hands-down the most common service call I get for this range. Food debris and grease buildup clog the ignition ports, causing those frustrating yellow or uneven flames. Swapping out the cap and ring almost … Read more
I’ve worked on dozens of LG gas ranges over the years, and the LRG4115ST is one of the most common models I see with burner cap and head issues. This problem shows up constantly — usually after a boilover gets food debris packed into the burner ports. In most cases, a simple cleaning or a … Read more
I’ve worked on the Samsung NX58H5600SS quite a few times, and a failed oven igniter is hands-down the most common repair call I get for this model. If your oven clicks but won’t light or just won’t heat at all, the igniter is almost always the culprit. Replacing part DG94-00520A is typically all it takes … Read more
I’ve worked on dozens of Whirlpool WFG505M0BS ranges over the years, and a sagging or falling oven door is one of the most common calls I get on this model. Nine times out of ten, the culprit is a snapped or stretched door hinge spring, and replacing part W10677868 almost always solves it completely. Dave … Read more
I’ve worked on quite a few Frigidaire FCRG3052AS ranges over the years, and a glowing igniter with no flame is almost always a failing safety valve — it’s one of the more common calls I get on this model. The igniter has to draw enough current to signal the valve to open, and when the … Read more
I’ve worked on dozens of Samsung NX58H5600SS ranges over the years, and a faulty spark module is hands-down the most common repair call I get for this model. When all four burners stop clicking or sparking simultaneously, the control board DG96-00292A is almost always the culprit rather than individual igniters. Dave Holt — Certified Appliance … Read more
I’ve worked on dozens of Samsung NX58H5600SS ranges over the years, and a failing door gasket is one of the most common service calls I get for this model. Heat escaping around the door is a telltale sign, and the good news is this is one of the easiest fixes you can do yourself without … Read more
I’ve worked on the GE JGS760SELSS quite a bit over the years, and cracked or warped burner grates are honestly one of the most common calls I get on this model. Heavy cookware and repeated thermal cycling are usually the culprits. The good news is this is a straightforward swap — no tools required and … Read more
I’ve worked on dozens of Kenmore 790.9735 series ranges over the years, and a surface element that won’t cycle down from high heat is almost always a failed infinite switch — it’s one of the most common service calls I get on this model. The good news is that replacing part 316436001 is a straightforward … Read more
