This repair guide will help you fix your garbage disposal.
Need a Replacement Garbage Disposal?
Price: $114.00
Disclosure: As an Amazon Associate, we earn from qualifying purchases. This means if you click on an affiliate link and make a purchase, we may receive a small commission at no additional cost to you. This helps support our site and allows us to continue providing free repair guides.
“`htmlCommon Symptoms & Causes
The following symptoms indicate your KitchenAid KCDS100T Tough Waste disposal is experiencing a Power Jam condition.
- The disposal hums loudly but the grinding plate does not spin
- The unit shuts off automatically and the reset button pops out repeatedly
- A loud grinding or clunking noise occurs before the motor stalls completely
- The disposal turns on briefly then cuts out with no further response
Power jams are typically caused by hard debris lodged between the grinding ring and impeller plate, a worn or seized motor bearing, or a failing overload protector that can no longer handle the unit’s electrical load.
“` “`htmlHow Much Does This Repair Cost?
DIY parts for fixing a power jam on the KitchenAid KCDS100T typically cost between $10–$50, depending on the components needed. A professional service call for the same repair usually runs $150–$300, including labor and parts. Tackling this repair yourself can save you $100–$250 or more.
“`Frequently Asked Questions
What causes a power jam on the KitchenAid KCDS100T?
A power jam typically occurs when tough or fibrous waste overwhelms the disposal’s motor, triggering an automatic shutoff. Overloading the unit with hard food scraps like bones or fruit pits is the most common culprit.
How do I reset the KitchenAid KCDS100T after a power jam?
Press the red reset button located on the bottom of the unit after allowing it to cool for several minutes. Make sure the disposal is switched off before pressing the button.
Is it safe to manually clear the jam myself?
Yes, using the hex wrench in the center hole underneath the unit allows you to manually free a stuck grinding plate safely. Always disconnect power before attempting any manual clearing.