Dave Holt 
I’ve worked on dozens of NewAir AI-215SS units over the years, and fan motor noise is hands-down the most frequent complaint I hear from owners of this model. In most cases, the culprit is either a worn fan blade rubbing against the housing or a failing evaporator fan motor bearing. Nine times out of ten, … Read more
I’ve worked on dozens of Frigidaire EFIC189 units over the years, and a compressor that won’t start is hands-down the most frequent complaint I see with this model. Nine times out of ten, the culprit is either a failed start relay or a faulty overload protector — both inexpensive fixes most homeowners can handle themselves. … Read more
I’ve worked on dozens of U-Line CLR2160S units over the years, and evaporator fouling is hands-down the most frequent service call I get for this model. Mineral scale and biofilm buildup on the evaporator plate will kill ice production fast. The good news is a thorough cleaning with the right descaler usually restores full function … Read more
I’ve worked on the Scotsman CU50GA-1A more times than I can count, and water filter replacement is hands down the most frequent service call I get for this machine. Most of the time, the fix is straightforward — swap out the old filter, reset the indicator, and you’re back in business within 15 minutes. Dave … Read more
I’ve worked on dozens of Euhomy IM-01 units over the years, and water not pumping is hands down the most frequent complaint I see with this model. Nine times out of ten, the culprit is either a clogged water pump inlet filter or a failed circulation pump motor — both of which are very DIY-friendly … Read more
I’ve worked on the Igloo ICEB26HNBK more times than I can count, and a leaking water reservoir is hands-down the most frequent complaint I see with this unit. In most cases, the culprit is either a cracked reservoir tank or a failed inlet valve seal, both of which are very manageable DIY fixes. Dave Holt … Read more
I’ve worked on dozens of Euhomy IM-01 units over the years, and display error codes are by far the most frequent complaint I see with this model. In most cases, the error traces back to either a dirty water sensor or a faulty ice-full infrared sensor rather than anything catastrophic. A good cleaning and sensor … Read more
I’ve worked on dozens of Frigidaire EFIC189 units over the years, and the ice size selector issue is easily one of the top complaints I see with this model. In most cases, the problem traces back to a faulty control board or a worn-out selector switch that stops sending the correct signal. The good news … Read more
I’ve worked on dozens of NewAir AI-215SS units over the years, and heavy scale buildup is hands-down the most frequent service call I get for this model. Hard water minerals accumulate fast in the evaporator and water lines, eventually blocking ice production entirely. The good news is that a thorough descaling cycle almost always solves … Read more
I’ve serviced dozens of Frigidaire EFIC189 units over the years, and mineral scale buildup is hands-down the most frequent call I get for this model. Hard water deposits clog the water pump and freeze-cycle components, causing slow or no ice production. A proper descaling routine with citric acid or white vinegar almost always restores full … Read more
