This repair guide will help you fix your garbage disposal.
Need a Replacement Garbage Disposal?
Price: $114.00
Disclosure: As an Amazon Associate, we earn from qualifying purchases. This means if you click on an affiliate link and make a purchase, we may receive a small commission at no additional cost to you. This helps support our site and allows us to continue providing free repair guides.
“`htmlCommon Symptoms & Causes
The following symptoms suggest your InSinkErator Cover Control Plus is experiencing cover alignment issues that need attention.
- The sink cover sits visibly crooked or off-center over the drain opening
- The cover control mechanism fails to activate when the cover is placed on the sink
- The disposal only runs intermittently due to poor contact between the cover and actuator
- The cover feels loose, wobbles, or does not sit flush against the sink collar
These problems are typically caused by a worn or damaged cover collar, a bent actuator tab, or debris buildup preventing the cover from seating correctly.
“`How Much Does This Repair Cost?
DIY repairs for cover alignment issues on the InSinkErator Cover Control Plus typically cost between $5 and $30 for replacement parts like covers or mounting components. A professional service call for the same fix usually runs $150–$300 including labor. Choosing the DIY route can save you $120 or more on this straightforward repair.
Frequently Asked Questions
Why won’t my InSinkErator Cover Control Plus lid sit flush after reinstalling it?
The cover hinge pins may be misaligned or the mounting tabs are not fully seated. Remove the cover completely and reattach it slowly, ensuring both hinge points click securely into position.
Can a misaligned cover prevent the disposal from turning on?
Yes, the Cover Control Plus uses a cover-sensing switch that requires proper alignment to activate. If the cover sits crooked, the switch may not engage and the unit will not run.
Do I need special tools to fix a cover alignment issue?
No special tools are required for most alignment fixes. A flathead screwdriver can help gently guide hinge tabs back into place without damaging the unit.